Sugar is an indispensable condiment in our daily life, and some restaurants are providing disposable conditment sugar in small packets, which brings better experience for the consumers.
Shown in the photo above, it is a pillow pouch sachet roll bag containing 50 grams of sugar. This sugar bag is made of PET/LDPE which is clear and good appearance. Because of the sugar’s qualities, this bag has a two-layer construction, which is more cost-effective and better for the customers’ needs.
In this post, let’s explain further on the dimensions.
Foil Materials 50 grams sugar pillow pouch sachet roll
The foil materials for this 50 grams sugar pillow pouch sachet roll is PET/LDPE.
Filled Level of 50 grams pillow pouch sachet roll
Observed from the above image, you may figure out the filled line of this 50 grams white sugar sachet pouch is around 70% of the total height.Sugar is often filled on the vertical-form-fill-seal machinery, with printed rolls running through the bag-former, and finally a pillow pouch is achieved, with 50 grams of sugar held.
Package Dimension of 50 grams sugar pillow pouch sachet roll
The following are the dimensions of this 50 grams white sugar sachet bag, with a figure attached below
- Width:80mm
- Height:120mm
Test Video of 50 grams sugar pillow pouch sachet roll
Now, we will going to fill 50g of sugar into a package.The weighing is shown in below picture.
You are advised to watch the video to understand the test process.
Package Dimension Test Report of 50 grams sugar pillow pouch sachet roll
Here we attach a PDF version of this package dimension report on this 50 grams white sugar sachet pouch. Please note, the density for the sugar applied in this test is 92g/100ml. And some other necessary information is included in this report. You may contact us if you have any questions.
Diecut line of 50gr Sugar Stick Pouch
The 50 grams white sugar sachet pouch is often produced using vertical, form, fill, and sealing lines. If the customer would like to print his gorgeous artwork design onto this pouch, then the artwork will have to be exactly laid into this dieline. You may just forward it to your designer for creative work, and feedback to us with a refined Illustrator or PDF file, with image resolution not less than 300 PPI.
That all. If you have any questions or doubts, you could send me an email at any time.
